bumpstop325

Also, just to add to the mix. When you get a flatty while driving, the rim has to be the first thing to hit the ground. So a car less than 100mm off the ground might not pass with standard rims on. I am under the understanding that heated and compressed springs (done by a pro) are all ok?

I like them. too bad they never came out of the factory like that

you should get rid of those kings aswell. esp if they are crappy variable constant ones. With a single constant spring. Dont forget when changing the front shocks that you replace or top-up the oil in the strut. Thisl aids cooling of the shock, when it heats up.

Was it these cars that came with the radio and air con as an added option? dripple dripple. very nice.

I have seen this car. It is in very good condition for its age. No paint fade, or love bumps anywhere. The inside of the car is v.tidy. Also has cruise control. Edit: no rust.

also your expansion tank needs to have some sort of catch container at the end of the overflow pipe. This is so ppl's cars dont spew water on the track, if something happens.

I was hoping to get in on my looks.

will be there, aswell.

2nd best thread after the H town Ninja's.

Remember, always wear your sunblock. It will protect you from the harmful rays.

very nice work. alot more where that came from?

The the a/c heater be removed outwith replacing it with a non a/c one? As in doing a rangi on blocking up the holes?

Dont forget that the LHD vehicles have, no steering rack on the RHS. This gives the LHD vehicles an advantage of more room to build the manifold in. Dr repower is a good start. I have had soome dealings with these guys and multiple dyno runs here. highly recommened.

A great loss for the never ending proctection and education of all wildlife. At least his life was taking by nature.

Another one for the masses. Those bus's are just as common as corolla's but at night time.

Imagine that! Boobs on Bikes. Scratches chin, while in deep heavey throught and imagine what could be done on the tail!...That bike pwn's111!!!11!1!! all other the other bikes, even if JC was on it and 50/50 was riding it. I would have a Mig. If, I could get one.

Did you search this topic? No, the front half is longer on the manual, because the box is shorter. You only need a replacement on the front half. the back half is the same.

I gave a lapdance to a black jungle woman because im sexy and i do what i want

$10,000 cash to fix. Ring up a wheel repair shop and ask? Let you fingers do the walking through the yellow pages. I would not pay more than $140 each repaired and painted. Please, if your going to waste space, please provide pic's and more information. Also, there is a search function. to be used first, when wanting to post a question. Thank You for your co-operation, Tim.

Spelling and Grammer, use at all times. Thank You

just sheet metal. I bent 2 safe edges on the top and the side and then just tacked it on with the mig, in 5 places. sprayed it with a couple of coats of black enamel paint.

I will build a mk2 design later when, i can spend more time on a carboard cut out first. It will most likely be a fully enclosed airbox No pipes as of yet. apart from taking out the headlights. The main mission of the day was to get the pod fitted correctly. for final design, then make a make shift heat sheild for the time being.

This is my mk1 design in heat sheild design. Spent most of the time i had, on making sure i had a one nice weld(by my opinion) on the air duct. This is not the final design. When other plans are put into action, further mods will happen. Makes alots more induction noise (only noticable over 4500rpm)and bum dyno says alot smoother rise in appilcation of throttle. Maybe +10kw if im lucky. It is as long as the mtec1 steering wheel is wide. I need to do a drive-by under that motorway bridge again, with this on.

sell it. no car, no chance of stealing it. simple

Dont do it. Shadowline :thumbsdown: Chrome, is way more bling and it looks better. Dont have an all black car. Matching chrome bumpers and trim. Incl the ones round the front and rear screen, when all done, it looks so much nicer on a black car. Trust me, i have owned one.