BM WORLD

$3k to 4k for a replacement engine plus fitting . car has been overheated at some stage ,probably due to some small plastic part failing and losing coolant and know one looking at the gauge etc. maybe they have just put some radaitor stop leak stuff in it to stop it from losing coolant. i think if you can get it for $5-6k and are prepaired to throw plenty of cash at it. beacuse if they remove the head and find it needs more than just a headgasget then you could be in for quite a few more dollars. like most other guys said better to find one that doesn't need all this work unless your handy with tools and have a spare parts car etc.

or you could try the e34 v8 brake system with the hydrolic boosted brake system , very slim unit .

someone a little while back was looking for a electric seats base motors etc for a e36 i have one now if they still need it?? 021433600

faulty head light height adjuster unit , just unplug the head light adjuster , common failing

$50 for heater valve thanks 021433600 [email protected] in papakura thanks brent

its gone

OK , just arrived today runs great . any takers ??? can split up the kit etc if needed. a few parts that may be of interest 328i engine . from a 96 nz new car zf 5spd gearbox . 2.93 medium diff (open type) good hood linning sedan non sunroof type black leather seats , door cards , with fold down rear arm rest with cupholders built in etc. black bonnet , gaurds , doors , 16" motosport wheels good tyres. side skirts , front and rear suspension ,brakes etc

was 4;3 but its gone sorry

would be easier if trademe had a miles / km option you could select or one that calculates and shows both , but then again that woukld just confuse some people

yes tricky to do with the manifold on , but pretty easy to get the manifold off.

old car now , just replace all the arms , thrust arm bushes will be the first thing i would look at. get it up on a hoist at a garage and get them to test each bush and ball joint for movement . you can buy a complete front end kit from ebay , all the suspension and steering arms in one go . then it will drive like new. http://cgi.ebay.com/ebaymotors/BMW-E34-525...=item35adf444db

yes e23 735i e28 535i and e24 635csi m30 engines all the same , excpet in OZ they will normally have the low compression usa spec'd engine 8:1cr 184hp (not good) as in nz , south africa and european and uk etc have the full fat version with 218hp 10:1cr etc. early m30 3.5L engines are sleightly different from 1978 to 1982 etc , but the 1983 onwards are the ones to get if you have to you could use a e34 535i or e32 735i engine but they are 211hp 9;1cr and require some mods to the engine mounts etc

this post is worthless with out pictures of your 540i 6spd

turn the dsp off for starters , make sure you have the loud button is on and bass and trebble set correctly. maybe that amp is faulty , they do give trouble some times. also the woofers have a foam surrounds which crubble and fall apart with age , lift the grills up and have a look , i have replacement speakers if needed.

coupe or sedan?? as they are different . most old ones are crap .

$1 reserve black leather seats , door cards and console parts , wood trim etc http://www.trademe.co.nz/Browse/Listing.as...783&ed=true

$1 reserve http://www.trademe.co.nz/Browse/Listing.as...783&ed=true

http://www.trademe.co.nz/Browse/Listing.aspx?id=388674947

buy my MINT!!!!! 318ti motorsport 1998. lighter than a 318is so faster!! http://www.trademe.co.nz/Browse/Listing.aspx?id=390057801

i dont believe them , go down there and match the 2 flywheels back to back and see if the teeth numbers etc are the same.

finishes tonight http://www.trademe.co.nz/Browse/Listing.aspx?id=388958353 $100!!!!!!!!

it has a switch on both sides , maybe they replaced the door card at some stage with one from a lhd car??

no sorry in bits , maybe you can make one out of two ??

http://www.trademe.co.nz/Browse/Listing.as...amp;permanent=0 8;30pm tonight

ah yes the fuse box lid , a common problem