skidz

Have a spare 320 FL computer if you do want to try it, have a complete 320 motoe so you could swap other bits and pieces also if you need to PM me

+1 for Kiwi Shipping used them twice, no problems

Should have one here, give me a call, 021 744 881 Cheers...Stephen

I have a couple here 971 6893 or are you joining us Friday? Cheers...Stephen

Oli, have a complete 320 facelift motor, $300 with all the FL loom and access...

can do

http://bringatrailer.com/2009/05/20/rare-i...-rod/#more-1761 I have seen it on Ebay before - maybe a year or so ago. It is just perfect

Can supply a low mileage 3.73 ratio medium case LSD, $800 plus freight from Wellington, Should bolt straight in

At the back of the sunroof is a piece of "spouting" or a drip tray in BMW speak - it runs across the ca and attaches to the sunroof lining, so that is slides back and forth with the roof. If this has become detached, the water will run down into the car, via the hoodling, onto seatbelts, rear seats, etc. If you tilt the sunroof, you should be able to shine a torch in to the opening and see if the channel is attached or not.

Can do replacement cable and lever, $20

You can have a look at mine, done this on two cars now.

It is not "for sale" as such - but with the Baur now ready to be my weekend car I just cannot justify having 3 E30's. I just keep finding excuses to keep it...

Then buy mine! Absolutely as it rolled out of the factory door!

Left side blank panel only, $5 plus p&P

Parting out 1988 Facelift 320 manual, engine, full manual gearbox conversion TM links below, PM me for other parts 320i Motronic engine complete fan to ECU link here 320 manual conversion, all parts, included here

I meant to say, you cannot run for points on full slicks...

You need semi slicks, Ollie, not full slicks, can run intermarque for club points on full slicks.

You are better off to go with 15" wheels and use the same Toyos they use for the race series. But I guess your brakes are too big to go back to 15"???

have e30 320 facelift radiator, good condition, $85 plus freight

Have freestanding engine lifter / hoist he can borrow

Well, I know six people in or around Welly that have E30 factory convertibles, and several Baur also, including mine... Cant be all bad!

Have one available, as described above, $75 plus freight from Welly

Just bought one from Elte Performance in Chch, looks to be a pretty good item (have not yet fitted) was around $90 plus freigth, included the washers and bits and pieces

Looking for an E30, M40 motor in good condition... And preferably close to Welly!