Lucan 196 Report post Posted November 18, 2010 He means nothing is as good as the OEM badges, not that they make CF OEM Quote Share this post Link to post Share on other sites
gouba 0 Report post Posted November 18, 2010 Got a warrant, didnt think i was going to. Have a slight leak in the steering rack fml Quote Share this post Link to post Share on other sites
_Matt_ 42 Report post Posted November 18, 2010 get that nasty scratch painted in the end ? Not yet, might paint by boot at the same time so waiting for some funds. Quote Share this post Link to post Share on other sites
JaseNZ 53 Report post Posted November 18, 2010 I pulled all the interior lining out to get the hood and pillars recovered. It's been sagging badly for ages, so I thought it was time to get it done. I've been procrastinating about it for far too long. No sagging interior FTW, Looks and feels so much slicker when its all done. Quote Share this post Link to post Share on other sites
dubman 39 Report post Posted November 18, 2010 Alignment done, then Mr. Miyagi'd my car Quote Share this post Link to post Share on other sites
Heino 1 Report post Posted November 19, 2010 REplaced the manifold adjuster unit. *a real bitch to gat to* and the heater control valve. ahh saved alota money Quote Share this post Link to post Share on other sites
Tristan 338 Report post Posted November 19, 2010 He means nothing is as good as the OEM badges, not that they make CF OEM True that. Quote Share this post Link to post Share on other sites
huff3r 347 Report post Posted November 19, 2010 Just need to unplug it at the roof, pull (read: break) the plastic clips that hold it the wiring to the roof and down the A pillar behind the covers, then feed it under the dash. Easy peasy. To get the panel to fit properly I filed down the stereo slot as it is slightly too narrow to fit, then just silconed the sh*t out of it behind it. Hope that helps. Copycat haha. I used a hacksaw to make it fit, and its a tight fit so its not moving anywhere. It is a good spot for it if you have a cage! Quote Share this post Link to post Share on other sites
_ethrty-Andy_ 2132 Report post Posted November 24, 2010 does this count??? had the last of 4 or 5 cans of black paint i had to get rid of before i threw away the can hahaha Quote Share this post Link to post Share on other sites
Gotheschu 1 Report post Posted November 24, 2010 does this count??? had the last of 4 or 5 cans of black paint i had to get rid of before i threw away the can hahaha does that euro plate in your windscreen make it obvious to the police that the black plate isn't legal? ( just curious lol ) Quote Share this post Link to post Share on other sites
_ethrty-Andy_ 2132 Report post Posted November 24, 2010 well i havent ever driven on the black plate. but i think the rules are as long as the plate is on the front of the car its okay. no cop is ever going to think the white on black plate is legal lol. besides, if i got pulled over driving that car, the fake plates are going to be the least of the cops worries haha. the fact of no warrent/reg/cert are going to be more of an issue lol Quote Share this post Link to post Share on other sites
_Matt_ 42 Report post Posted November 25, 2010 Fixed my temp gauge last night blew one of the bulbs tho will fix that now. Soldered for the second time in my life haha. now it tells me I need an inspection...can I get rid of that? Quote Share this post Link to post Share on other sites
_ethrty-Andy_ 2132 Report post Posted November 25, 2010 confirm on the interwebs, but 99% sure you connect pin 7 on the diagnostic plug to ground. been a couple years since ive done it i am not responsible if it doesnt work/car goes kaboom Quote Share this post Link to post Share on other sites
Mark 178 Report post Posted November 25, 2010 Impressive Matt. You're braver than me pulling the cluster apart like that. I need to replace my SI batteries too. Wanna go round to the olds and do that for me? Be careful about resetting the Inspection lights without a proper reset tool. DCH should do it for you for free. God knows we've spent enough money with them! Quote Share this post Link to post Share on other sites
pjay 8 Report post Posted November 25, 2010 I cursed at it. Quote Share this post Link to post Share on other sites
_Matt_ 42 Report post Posted November 25, 2010 Impressive Matt. You're braver than me pulling the cluster apart like that. I need to replace my SI batteries too. Wanna go round to the olds and do that for me? Be careful about resetting the Inspection lights without a proper reset tool. DCH should do it for you for free. God knows we've spent enough money with them! yea will do, wanna give me $15 bucks for batteries? and I work for a very reasonable rate of $30 ph see that air vent to the right of the cluster? how is flops up. I fixed that too while the cluster was out haha. A dot of superglue to act as a spacer worked a treat. Quote Share this post Link to post Share on other sites
Lucan 196 Report post Posted November 25, 2010 Got the E36 Mtech bumper back from the painters! Finally Quote Share this post Link to post Share on other sites
Gaz 1060 Report post Posted November 25, 2010 Swapped one for another one. Still got two though..... Quote Share this post Link to post Share on other sites
KRZY-E30 0 Report post Posted November 26, 2010 Last night i swapped the original headlights on my E30 to some Angel Eyes Projectors + HID Bulbs Going to give him a wash and a clean out. pictures to come still Quote Share this post Link to post Share on other sites
$toffz 0 Report post Posted November 26, 2010 Have don't anything today as such but in the last 24 hours have bought. Jamex Super Lows Ultra Racing NZ Strut Brace. Both for the convertible Next weekend will be a good weekend Quote Share this post Link to post Share on other sites
tony2657 5 Report post Posted November 26, 2010 yea will do, wanna give me $15 bucks for batteries? and I work for a very reasonable rate of $30 ph see that air vent to the right of the cluster? how is flops up. I fixed that too while the cluster was out haha. A dot of superglue to act as a spacer worked a treat. I see you replaced the Digitor nicads with energizers? Did you research to make sure they will be OK? If so wanna do mine as well as Mark's. Might as well as they both in same garage!!! You happy to pay him $30/hr Mark? I can help with resetting the Inspection light Matt [see attached] but all care no responsibility and reading it will cost you $90 Service_Indicator_Reset.doc Quote Share this post Link to post Share on other sites
Neurotic 0 Report post Posted November 28, 2010 Got tyres fitted and balanced so can now get a wof, washed it and took photos Quote Share this post Link to post Share on other sites
bmpower 3 Report post Posted November 28, 2010 Remember how it was when we first picked it up?? - so different now!! My 3rd Fav E30....!! Quote Share this post Link to post Share on other sites
kiwi535 538 Report post Posted November 28, 2010 cleaned it again for first test driver Quote Share this post Link to post Share on other sites
dubman 39 Report post Posted November 30, 2010 T.T Quote Share this post Link to post Share on other sites
