Driftit 2078 Report post Posted May 14 11 hours ago, Jadon said: Also can it be tuned so the car won’t auto shift when in manual shift mode. Thanks If you put the selector in sport then select a gear it will stay in that gear. Quote Share this post Link to post Share on other sites
Danch 35 Report post Posted May 14 20 hours ago, Driftit said: But the guys a few pages back said it is the most comfortable. The single mass flywheels are much cheaper and have more of a sporty feel to it. But you can suffer from vibration etc. 11 hours ago, Palazzo said: There’s a kit on Spareto with conversion to single mass as well. Valeo, €442. I did read about that. The SMF conversion kit is indeed significantly cheaper than DMF+clutch. However, it is my DD so I'm not sure how I'll find the SMF for daily commuting. Then again, I used to drive manual japanese cars like ek9, zc31s, and 350z so maybe it not going to be too bad.. 🤔 Quote Share this post Link to post Share on other sites
Driftit 2078 Report post Posted May 14 Forgot to mention. There are a couple of E87's at Pick a Part in Wellington. Pretty stripped. One of them was a late model motorsport. Had really nice half leather LCI door cards. I was going to grab them. Then found someone had taken just one of them..... All the FRM3 modules were gone. I did pull out a FRMA module that I left inside the car in a dry spot. I did grab the LCI's parcel tray. I didn't realize pre-LCI cars had such a rubbish one. Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted May 20 (edited) Rear tweeters! Dude doesnt know he has Got to be the rarest 130 option, next to probably comfort access. https://www.trademe.co.nz/a/motors/cars/bmw/130i/listing/4715309764?bof=awug6fto Edited May 20 by Jacko 2 Quote Share this post Link to post Share on other sites
Vass 831 Report post Posted May 20 So this guy got cert for just the wheels & spacers? Does look a nice setup though. https://www.trademe.co.nz/a/motors/cars/bmw/130i/listing/4720878572?bof=DWbwwFsI Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted May 21 6 hours ago, Vass said: So this guy got cert for just the wheels & spacers? Does look a nice setup though. https://www.trademe.co.nz/a/motors/cars/bmw/130i/listing/4720878572?bof=DWbwwFsI I "think" this is a car a looked at a few years ago for someone on here, at the time it had a bird sh*t welded 120 back box on it, dead clutch throwout bearing, and the rear arches were chewed out and cracked paint from poor fitment. Trying to find pics I took to confirm rego. 1 Quote Share this post Link to post Share on other sites
NZ_InFerno 371 Report post Posted May 21 55 minutes ago, Jacko said: I "think" this is a car a looked at a few years ago for someone on here, at the time it had a bird sh*t welded 120 back box on it, dead clutch throwout bearing, and the rear arches were chewed out and cracked paint from poor fitment. Trying to find pics I took to confirm rego. That was for me, if it is the same car 1 Quote Share this post Link to post Share on other sites
Herbmiester 923 Report post Posted May 22 (edited) Has anyone had their 130i manually converted? If so how much did it cost? Also has anyone done a GM6L45 to ZF 6hp swap? This article makes for some interesting reading. https://www.xautomotive.com/blogs/news/from-gm-to-zf-6hp Edited May 22 by Herbmiester Quote Share this post Link to post Share on other sites
Driftit 2078 Report post Posted May 22 (edited) 8 hours ago, Herbmiester said: Has anyone had their 130i manually converted? If so how much did it cost? Also has anyone done a GM6L45 to ZF 6hp swap? This article makes for some interesting reading. https://www.xautomotive.com/blogs/news/from-gm-to-zf-6hp I don't understand why you would want to do this auto to auto swap. The GM box is actually pretty good. It is common, cheap and changes pretty quickly when in sport. My one was even abused by only having 3ltrs of trans oil in it for quite some time. That was nearly 70,000kms ago. Still running good. All manual conversion parts I have seen are crazy expensive. You would be best to speak with Brent (BMWorld) or Ray (HellBM). It is why I snapped up this pretty average manual the moment I saw it. I could strip the box and conversion parts out and sell them for more than I paid. Turns out I feel sorry for it and am now fixing it up... Buy James 130i manual for $7k. Swap all your good bits into it. Sell yours. Edited May 22 by Driftit Quote Share this post Link to post Share on other sites
Herbmiester 923 Report post Posted May 22 Well I actually quite like Autos, especially the 8HP, but an XHp 6HP is a fast shifting box. Also I already have a manual BMW and the 130 get driven by my wife and she hates manuals in Wellington traffic. The GM when its not suffering from a dying torque converter is ok, but not in the same league as a 6HP, and but my torque converter is on its way out, and it's about 2k for a rebuild. As you have mentioned a manual swap is big dollars 5k or more. What's up with James 130l? Where is that for sale? Quote Share this post Link to post Share on other sites
Driftit 2078 Report post Posted May 22 Its this one. https://www.trademe.co.nz/a/motors/cars/bmw/130i/listing/4683469516 Quote Share this post Link to post Share on other sites
Jadon 4 Report post Posted May 22 How can you tell which auto box you have? Are there any ways of knowing without jacking the car up and finding a part number? Quote Share this post Link to post Share on other sites
Harper 548 Report post Posted May 22 20 hours ago, Herbmiester said: Has anyone had their 130i manually converted? If so how much did it cost? I bought a half converted one for cheap and finished the job. It's pretty easy really. You have to do the mechanical conversion, wire in the clutch and reverse switch. Code the relevant modules and it's done. That era of BMW is pretty modular and easy to swap. Weitz had a 130i manual conversion for sale at $3k for ages. Not sure if it ever sold. Quote Share this post Link to post Share on other sites
Driftit 2078 Report post Posted May 22 7 hours ago, Jadon said: How can you tell which auto box you have? Are there any ways of knowing without jacking the car up and finding a part number? https://www.realoem.com/bmw/enUS/select Just make sure you select LCI if you have one. It will be a GM box. Quote Share this post Link to post Share on other sites
Jadon 4 Report post Posted May 23 6 hours ago, Driftit said: https://www.realoem.com/bmw/enUS/select Just make sure you select LCI if you have one. It will be a GM box. It is the ga6hp box which I assume is the gm box. What cars came out with the zf boxes? I assume the xhp tune will not work on the gm box then. Quote Share this post Link to post Share on other sites
Xander 10 Report post Posted May 23 19 hours ago, Driftit said: Its this one. https://www.trademe.co.nz/a/motors/cars/bmw/130i/listing/4683469516 Is James a known user of this forum? I was looking in to this car couple weeks back, but got put off by them stating they did all the work themselves, mileage and no papers. Quote Share this post Link to post Share on other sites
hybrid 1043 Report post Posted May 23 52 minutes ago, Xander said: Is James a known user of this forum? I was looking in to this car couple weeks back, but got put off by them stating they did all the work themselves, mileage and no papers. Know the car well and the owner. You're more than fine. PS yes he is one of the OG administrators on here. 1 Quote Share this post Link to post Share on other sites
Assault 3 Report post Posted May 23 James is great, he's a master at live taxidermy, so you're in good hands 2 1 Quote Share this post Link to post Share on other sites
BreakMyWindow 1874 Report post Posted May 23 Buy with confidence, James changes the oil in his cars probably more than his undies and never takes them to redline. Quote Share this post Link to post Share on other sites
Jamez 2147483647 Report post Posted May 23 James is nothing short of a car connoisseur extraordinaire, a veritable maestro of vehicular mastery. When it comes to purchasing a car, look no further than James, for he is the embodiment of automotive expertise and integrity. With an encyclopedic knowledge of automobiles and a passion that burns brighter than a thousand suns, James meticulously curates only the finest selection of vehicles for his discerning clientele. With James at the helm, rest assured that every aspect of your car-buying journey will be orchestrated with precision and care. From the moment you set foot on his lot, you'll be greeted with a warmth and sincerity that rivals the embrace of an old friend. His attention to detail is unparalleled, ensuring that each vehicle is not only in impeccable condition but also comes with a comprehensive history that leaves no stone unturned. But James is more than just a purveyor of cars; he is a trusted advisor, a sage in the world of automotive transactions. His transparency knows no bounds, as he lays bare every detail of the vehicle's maintenance history, sparing no expense in ensuring full disclosure and peace of mind for his customers. Whether it's the mileage, the maintenance records, or the paperwork, James leaves no room for doubt or uncertainty. In the realm of car sales, James reigns supreme, a beacon of honesty and integrity in a sea of uncertainty. So, when it comes time to embark on your next automotive adventure, remember this: James isn't just the best guy to buy a car from – he's the only choice for those who demand nothing but the absolute best. 5 3 1 Quote Share this post Link to post Share on other sites
April 2 Report post Posted May 23 James is a great mechanic The 130 has got to be the easiest car he engineers - check out his YouTube https://youtube.com/@swiftdb4 2 Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted May 23 James has ChatGPT 3 Quote Share this post Link to post Share on other sites
Xander 10 Report post Posted May 23 Little bit more and I might hear James is chuck Norris 🤣, thanks for the feedback on the elusive James Quote Share this post Link to post Share on other sites
Jacko 2156 Report post Posted May 25 Some headers for sale on facebook if anyones keen. Quote Share this post Link to post Share on other sites
Driftit 2078 Report post Posted May 26 Umm. Love the "bends". 1 Quote Share this post Link to post Share on other sites
