pureboiracer

is this thing finished yet? youve had long enough..

im hearing that....

engine is now at reconditioners, its amazing what you can fit in the boot of a 540

i thought the english were used to cleaning up oil from the garage floor?

have fitted xyz coilovers to an e30 race car, best coil over ive seen for the money imo...

lollies can you say UNDERSTEER???

the race car saw its first fill of fluid today... progress...

aka, the earthquake fund...

its ok, we will just defeat them with our elite defence force... oh wait...

medium case lsd can take 500hp allllll day long.

that and gas tanks are often plastic so a spark is unlikely

^like

polygrips, spanners, double ended screw driver, spark plug tool and handle for said tool, allen key. Unsure of plastic bit.

Hey guys, need to get hold of an unmolested m20 flywheel sooner rather than later.. Anyone got anything lying around? Cheers Oli

tint supreme, operates out of a shop on hutt road, does a good job and is the cheapest you will find, did my e30 for 250 a while back. google him

what size hole do you need to run the common guages? im guessing the 2"??? Might be interested in getting some..

would it be worth telling local tyre shops, if the guy tries to move the wheels he will have to paint them and might get the tyres taken off to do it.

Thanks but have a motor already. andy i did i will reply now.

cheers john, will try and head up your way in the next couple of weeks

so far i have the following, E30 325i rear swaybar $40 Front and rear lower kit peices, will get pics up later today, its not tech 1, 2 acs or any of the normal ones.. $100 for both.

u can buy a capped off peice of hose for the outlet from repco or somewhere similar, looks like a little condom.

make sure there is nothing around the area that the hose could possibly go to. if not just leave it blocked up... if it aint broke....

its a vacuum hose of some sort, cant tell where its supposed to go from your picture though. perhaps another pic slightly more zoomed out? http://www.realoem.com/bmw/partgrp.do?mode...hg=13&fg=15 see if you can find it here

from what ive seen of brake conversions on e30s is that when you use the e32 master cylinder there is a little cap kind of thing that is put into the cup in the master cylinder (that the rod from the booster pushes into.) this takes up the play that is created. (around 4 or 5mm). May pay to whip the master cyl off the booster, (you can do this with the brake lines still hooked up, and check that its there, and before you pull it off check the linkage rods behind the glovebox and see if that is where you have play.

Hey guys, need some stuff for my e30. its a 1987 pfl 320i manual. need parts 4, 7 and 8 from the following link. http://www.realoem.com/bmw/showparts.do?mo...hg=51&fg=20 need parts 16, 18 and 19 from the following link. http://www.realoem.com/bmw/showparts.do?mo...hg=51&fg=20 also need an m20 flywheel, good condition m20 rear lights, two front brake pipes, (from the master cyl to the wheel arches, steel pipe.) a master cylinder that fits either the following two requirements. Brake master cylinder 19,05/20,64MM ? 34311154263 Brake master cylinder 19,05/20,64MM ? 34311156273 the front half of a standard m20 exhuast, from the flange at the manifold to the 1st factory muffler. an open 4.1 small case diff. the metal brackets that hold the D-bushes for the front sway bar. That is all i can think of at the moment, i will try bmw for the clips etc and will go round to local wreckers but am too busy over the next couple of weeks to get out the house much so i figured i will just ask on here in the meantime. any help appreciated. thanks oli