B.M.W Ltd
-
Content Count
1354 -
Joined
-
Last visited
-
Days Won
34
Everything posted by B.M.W Ltd
-
Sounds like back firing to me as well... should scan it first and check for airleaks
-
Needs to be scanned. I can do it today... call me (09) 2722546 Glenn
-
You forgot the badly worn disc rotor Ron....maybe the pads are metal to metal as well
-
My ETK works
-
need to borrow scanner for mercedes......... (sorry)
B.M.W Ltd replied to qube's topic in General Discussion
Can sort it for you next week Kyu.... but I can't do it for $140... normal retail costs would apply -
Simon... you'll be very lucky to get / buy a second hand hand grenade. Qualitat can do the repair for approx $3,000 with their new chain kits. Depends on the damage. More damage is created while driving as against failure on start up.
-
We can repair the control unit for you. Ring me in the morning (09) 2722546
-
need to borrow scanner for mercedes......... (sorry)
B.M.W Ltd replied to qube's topic in General Discussion
Follow the oil leak trails around town Kyo....... you'l find one -
NZ Couriers will take it so long as it's described correctly
-
Where did you get those "T" connectors from Toby ?
-
A baseball bat cannot be classed as a weapon if it is accompanied by a glove and ball. I believe the alloy bats are the better ones
-
Oil dripping onto the exhaust manifold from the rocker cover and or the brake vacuum pump
-
2001 320D Power Loss problem. BM Workshop or Team Mc Millan.
B.M.W Ltd replied to BruceMW's topic in General Discussion
I did say the fault may need a dyno to accurately determine the true fault under driving load conditions. I may be wrong... I can be quite frequently -
When it plays up check that you have or don't have systems voltage at the violet wire on the ignition switch. Failing switches are quite common
-
Just buy 5 liters off the workshop in your own container. You'll be needing it
-
Is the old one beyond repair Clinton ?
-
It doesn't matter, until you need to fit the driveshaft and line up the driveshaft bolts
-
Spin it gently while pushing. This is done on the bench or floor... not while your trying to fit the gearbox. I hope you didn't fit the torque convertor to the flywheel first.
-
Auto Trans in Auckland Ph: 3092538
-
Is the vehicle going into sleep mode ?
-
Talk to Harold @ Transmission Solutions Ph (09)2777177 or 0212120561
-
Nardi steering wheel spoke metal polish
B.M.W Ltd replied to musccoo's topic in Brakes, Suspension & Steering
Autosol -
Call in with both keys and I'll sort it for you... ring me first (09) 2722546
-
The L/H one gives out first. Get someone to change gears in the vehicle rev-forward and check with a stethoscope.
