euroriffic

Found it! I've been looking for this post the last few days haha. Cheers for that, will make a huge different in both looks and me feeling safer

That was thru Paul at Milland, new clips and screws too.

Well there's probably a Burnt out one going cheap in Argentina!

Fitted new windscreen cowl. Looks much better! Also discovered the e46's dipstick is dissintergrating. Hmmm

I've got a m20b23 with loom/computer for 300$$$ if you want that? Plus $100 shipping

My electrical barrel fell off the back of the key barrel once. So had to use both a key to do steering lock and a screwdriver to start. Didn't look stolen at all! Cable ties fixed that issue tho!

Also had this brought up on my old 328i a few years ago. If they're factory that's fine, but if not and you're using them as park lights you can only have one at the outer most point per side. So only on the low beams. But the guy was like just unplug the centre ones and what you do after the wof is your call. So plugged them back in after

M3 of course! Apart from the e30 the others are good to go now that the 46 isn't spewing coolant. Cut down to 4 bmws now, times are tuff!

Haha hope so! Got it thru Paul at Milland so should be, also in box are belts, tentioners/idlers, sway bar bushes and links.

Done

Woooo presents!

Yea I wondered that myself! Was serviced in winton a lot so that's my guess. Hoping my engineer mate can re tap and fit slightly bigger bolt :|

Did you not get my email full of pics Rob? Maybe that's why I didn't hear back from ya. She's a nz new, we're the second owners at 297xxx Kms, 1990 325ise, auto with sport select, full electrics, sunroof, cloth interior is 8.75/10. Has the odd mark and small hole, small crack in dash that's been semi repaired, but nothing to cry over. Has all the se goodies like map light mirror, full obc, steering wheel, skirts, fog lights, not in for wof due to cracked glass but have recovered in yellow tint for the time being. Engine has just had a replacement head that's had $700 + spent on it for hardness and crack testing, valves re faced, acid dipped, skimmed etc. Have all recipts, as well as for new cambelt, tentioner, gaskets, waterpump, t.stat, spark plugs, battery, drive shaft centre bearing. Runs, sounds and drives amazingly! Almost makes me wanna keep this and sell the e46 instead! Have standard wheels and a set of weaves for it as well for extra. Body is rust free, at the mo needs some dints taken out the drivers side but will hopefully get that sorted late this week or next week depending how busy panel beater is and tidy paint up. And also trying to find the trim for drivers door and a glove box latch.

Two steps forward, one step back on the e30. New battery, adjusted valve clearance so now she starts and purrs like a kitten. Buuuuttt... Went to change oil and filter and turns out the sump drain is stripped. Ugghhhh

Where did you aquire said nuts? Because I'm running the reinforcing plates on the front it gives it abit of a lift so don't have as much thread to screw the nuts on with and are only about half on. And are these tapered/sleeved so can get more turns on to the struts. Cheers

Link to trademe listing for 328i http://www.trademe.co.nz/Browse/Listing.aspx?id=847642334

Even has a gt/ltw wing!!!

Prefect for boost!

That would certainly rip your nightie!

I've got 18x9 et22 on the rear of mine with a 225/40 with only really the the lips rolled and have a bit of a rub but nothing too bad. Doesn't rub with the 17x8 et20 245/40

Here ya go. Have some light curbing but nothing major

Found why the e46 has been slowly using water over the last few weeks and then using a lot in the last week. Good old cracked expansion tank! Good thing it was caught early before it completely gave out. So that will be this weeks task

Yea I've left my ute unlocked a few times overnight with at least 5k+ worth of tools inside and usually have drums of cable on the back. Nothing gone missing so far

I just brought a wee bottle pump from Supercheap for about $25 that has a hand pump on top with a flexi tube with a metal hook like end so it stays in the box. Have used it a few times to do diffs and manual trans. Even has measurements marked on it so you know how much you've used.

Saw the email haha. But said it was 99.99 but don't know if that was listed price or with 25% off since if usually is about that.spose that's the good thing with the sca club card. Doesn't matter if it's not on special when you by it, will get reimbursed when it is