euroriffic

Took the 325 for a gravel hill climb and came across a civic that had nosed it into the bank and smashed the whole front right corner in. Car had moved to side of the road from impact area, hazards on, brake light on but no one in it and didn't see any one walking down the road. Wonder if it's still there...

Got everything back together, bleed coolant, new oil and filter, fixed non working fog lights. Found missing cables for missing outside air temp, hope to get a replacement and plug next week. Fixed broken wire on plug for coolant level sensor, new terminals for aux fan so that runs again. Fitted replacement brake ducts aswell. Drives a lot nicer now with working rear shocks and new mounts.

For once I've finally had a two day weekend! Well three in a row now. forget how good they are and what I can get achieved when your not spending the only day off hungover haha

Stripped all the flaking paint off boatys valve cover, repainted it. Cleaned all the crap from the inside of it. Replaced water pump, t.stat, new alloy housing, new belts, coolant, spark plugs. Put newly painted valve cover back on with new gasket. Tomorrow will be get coils back and associated bits so can fire her up, bleed coolant system, run engine flush and replace oil and filter and should be running like a dream

Blue e36 m3 and a sweet e90 msport touring. So purdy!

Nah still look at saturday

Yup same idea, down in the old burnside freezing works

Put the boot back together in boaty after replacing rear shocks and new top mounts. Put replacement door tweeter in and replaced broken window clips in drivers door. Refitted door panel. Cleaned afm and throttle body and replaced air filter. Undid bolts for valve cover ready to take off tomorrow and replace gasket.

Yea swing round some time and I'll show you what the go is. Heaps on 36s at pull n pay so can be a replacement for probably $10

Will try get there this week or Saturday, there's a few other bits I wanna steal off it.

My hand break one was a bit like that, just turned it inside out on it, put a small cable tie or tape round it then slide the rest back over

Welcome, some nice cars you have there! Bring both over!!

Must be just you. He only checks work emails during the week and generally here back within the hour if not sooner

Yep same here... Need a good recommendation for new pads for the new rotors

Very minimal on mine tho, and I cant see it when I'm driving anyway haha!

Mine sits fine...

Mine generally runs between 90-100 normally but does get up to around 110 when giving her a blast. But I am in a colder climate so better cooling

There's a manual e36 at pull n pay down here with a duff gearbox, so could strip the bits for ya maybe. It's a 318 so don't know if the driveshaft is correct one for ya

Haha too well engineered! Slider sounds like a good idea. Works for ice road trucker guys haha

Radiator to big or need a different T.stat?

Sure did, e60s, maybe m5s but all had a third pedal, or did us get proper manuals?

Whoop whoop!!

So the -12 in the touring won't pass cert??

Blasphemy! More details on this movie you speak of???

Sure you have!!!