Jump to content
Lucan

What'd you do to your BMW today?

Recommended Posts

Never ending, eh Mike?! I put the valve covers back on. No oil leaks and the car works... Job done.

post-16586-0-00340100-1391167102.jpg

(sorry about the low light phone pic)

  • Like 1

Share this post


Link to post
Share on other sites

Never ending, eh Mike?! I put the valve covers back on. No oil leaks and the car works... Job done.

attachicon.giffinished.jpg

(sorry about the low light phone pic)

Good work man.

Yeah it's like that but what fun is a perfect car? Boring!

So due to the discovery tonight I just went OCD and ordered some parts tonight, rear subframe rebuild kit basically, including reinforcement plates, exciting.

List_of_parts.png

Share this post


Link to post
Share on other sites

What's the differance between the 325i and 328i subframes? I was under the impression it was just the brakes.. Just done the reinforcement plates last month. Have pics etc if you need guidance.

Good work man.

Yeah it's like that but what fun is a perfect car? Boring!

So due to the discovery tonight I just went OCD and ordered some parts tonight, rear subframe rebuild kit basically, including reinforcement plates, exciting.

List_of_parts.png

Share this post


Link to post
Share on other sites

Andy, just read through your latest updates on the V12 E34..... all i have to say is that i love your car!

Really makes me want to buy an E34 touring, but its hard to settle for a boring grey/green one when yours is such a delish colour.

Cheers Mate

i need to do another update very soon. Engine is all back together now, while it was all apart i noticed one of the throttle bodys on on side (drivers side for the passengers side bank) isnt opening and closing as freely as it should. idle has always been a little rougher than it should be, and there is no idle valves on this motor, its all done through the throttle, so i would say it probably is my cause.

once its all back running correctly again, cant wait to get out and about in it, havent really driven it for over half a year now lol

Share this post


Link to post
Share on other sites

Went to vtnz to swap over the headlights as the adjusters had broken and fit a new number plate light and indicator bulbs that's all the wagon needed to be re registered

Share this post


Link to post
Share on other sites

Pulled it out yesterday, cleaned it today, painting the block tomorrow, and then onto the rest

post-733-0-44773500-1391317407_thumb.jpg

Share this post


Link to post
Share on other sites

took the cab for a very good run yesterday to Taupo and back in one day, about 750km

made it there and decided to get gas at turangi on the way back, i always go to Z because of my fuel card and wasnt sure where the next one was, but still had another 20L to go in the tank so was pretty impressed at that, was driving swiftly as i had a lot of ground to cover in the day, and still got just over 8L/100km so pretty pleased with that.

And the E30 problems story: On the way back, those that do the route will know the very rough train tracks you have to cross followed by a steep left hand corner/climb. went over those and not even quickly as the car is lowered, and dont want the lip falling off (again). But even so, started missfiring on the steep hill straight after that. f**k. pulled over as soon as i could, had a look, and some how 3 of the leads (2, 4 and 5) had popped off a bit at the spark plug end! One have them may have been a bit loose already as it has done that once before, but then came right and i didnt even do anything. Back on the road all the way home.

edit: if your interested, i had this co-driver with me for the way back. (yes i mowed the lawns today after this photo lol)

IMG_1081_zps0c95875a.jpg

Edited by _Ethrty-Andy_

Share this post


Link to post
Share on other sites

Yep I cross it every day you have to go to the middle of the road Andy

Share this post


Link to post
Share on other sites

I haven't actually done anything yet but I have ordered a few parts from Turner Motorsport in the US.

The car is a F10 M5 - I've ordered;

Axle back straight pipes - Turner Motorsport version

H & R lowering springs - 1 inch at front - 0.7 inches at rear

Spacers for front (12.5mm) and back (10mm)

Full LED interior light package

Black side grills

Black front grills

Genuine car cover for the M3 CSL

These should be a good start to making the M5 a bit cooler!!

Finally finished installing all of the above. Some quick comments;

1/. The exhaust is epic. Makes the M5 sound great. Very loud at start up, but on the open road it's fine when cruising.

2/. LED interior lights - very easy install and totally changes the car. A must I think for just over $100 a very cheap upgrade. The M5 has 19 interior lights to replace when doing this, however it comes as a kit so very easy.

3/. The black grill and side gills make the car look a lot better.

4/. The H&R springs give the car a great stance with the spacers. Very pleased I did this!

All in all very happy with everything. Now I just need to decide if I want to paint the wheels satin black or will this be overkill....... So many first world decisions!

Edited by mjh
  • Like 1

Share this post


Link to post
Share on other sites

Lol may I ask why did u pull the v12 out?

Edited by Mr2low

Share this post


Link to post
Share on other sites

Lol may I ask why did u pull the v12 out?

sold it

going into a serious offroader with a super charger bolted to it

Share this post


Link to post
Share on other sites

sold it

going into a serious offroader with a super charger bolted to it

are you shipping it down my way?

Share this post


Link to post
Share on other sites

are you shipping it down my way?

they are picking it up today , going back to wellington .

and yes you can buy the V12 badge now

Share this post


Link to post
Share on other sites

they are picking it up today , going back to wellington .

and yes you can buy the V12 badge now

thought it migh be coming here :P

Share this post


Link to post
Share on other sites

there was a v12 jeep on trademe years back running a bmw v12 into a toyota mr2 box rotated 90 degrees to split the power front and rear to suzuki diffs.

was really really weird

Share this post


Link to post
Share on other sites

there was a v12 jeep on trademe years back running a bmw v12 into a toyota mr2 box rotated 90 degrees to split the power front and rear to suzuki diffs.

was really really weird

yea similer setup . that one was turbo'd , same builder will be doing it for these guys , they where telling me they drove that one ,said it was completly MAD

will be like this one

http://www.trademe.co.nz/motors/specialist-cars/competition-cars/auction-595782458.htm

268225308.jpg

Edited by Brent HARTGE535i

Share this post


Link to post
Share on other sites

Finally finished installing all of the above. Some quick comments;

1/. The exhaust is epic. Makes the M5 sound great. Very loud at start up, but on the open road it's fine when cruising.

2/. LED interior lights - very easy install and totally changes the car. A must I think for just over $100 a very cheap upgrade. The M5 has 19 interior lights to replace when doing this, however it comes as a kit so very easy.

3/. The black grill and side gills make the car look a lot better.

4/. The H&R springs give the car a great stance with the spacers. Very pleased I did this!

All in all very happy with everything. Now I just need to decide if I want to paint the wheels satin black or will this be overkill....... So many first world decisions!

Got any pics of this?

Share this post


Link to post
Share on other sites

Fixed rattle coming from L/R caliper, and rattle coming from R/F brake dust shield. Now sipping on a homebrew Bush honey hefe. Job well done.

Sent from my HTC_PN071 using Tapatalk

Share this post


Link to post
Share on other sites

Sold the e36 coupe so now down to a manageable two BMWs haha

Share this post


Link to post
Share on other sites

yea similer setup . that one was turbo'd , same builder will be doing it for these guys , they where telling me they drove that one ,said it was completly MAD

will be like this one

http://www.trademe.co.nz/motors/specialist-cars/competition-cars/auction-595782458.htm

268225308.jpg

thats Brian Howatt on the right, really really intellegent guy. i recognise the guy on the left i think but i cant remember his name. Have seen the TTV12 from a 100m away doing trials but never up close

Share this post


Link to post
Share on other sites

Got bored so made my own version of a upgraded M50 water pump

post-793-0-44274500-1391925178.jpg

  • Like 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...