*Glenn*

Not a wise thing to do if you want it to last. I would recommend Diff Specs in Drury to sort it for you.

You don't need to check it that way. When the car is running and playing up, release the oil filler cap and see if you can raise it of it's seal. If there is too much suction on the cap the valve is knackered and you need to replace the whole assembly. You can't buy the diaphram as a part. Edit: If you replace the valve assembly...remember anything that ends up inside the plenum chamber when your doing this will damage your engine

I know that... but I was only pointing out that we do have police members on this forum

I'm running the M44 fuel pump with the M52B28 in my 318ti with no problems

Empty your pockets

They both run 3 bar without vacuum & 2.5 bar with vacuum. No sealant required on the gasket... just new gaskets and a little rubber grease.

Price & pictures are mandatory in the For Sale section thanks

It really amazes me .. they can do all this : Adaptive Drive, Adaptive Headlights, Comfort access, Climate Comfort Windscreen, Comfort Seats, Hi-Fi stereo system, Heated Seats, Navigation System Professional, Park Distance Control, Soft Close Doors, Self Leveling Suspension, Sunroof Electric, Sunblind Rear Window, Voice control, 21 Alloy Wheels. But they can't stop them burning or leaking oil & water at very low kilometers Where is all this so called technology taking us ??

They're like Harley's... they either leak or burn oil

Did you not know we have "fuzz" on this forum ??.... Seriously

A scan should sort out what the problem is. Where are you located ?

Once it is in limp mode you won't get it out without a scanner. There may also be others issues which you will also pick up with the scanner. All hoses, plugs & connectors are important.

Possibly... especially if it's vacuum piping . Youv'e also gone backwards with your swap choice. ABS, DME & EGS may have communication issues as well

It will be in limp mode (3rd gear) You'll need to get it scanned first. What type of swap have you done ??

We don't work Saturdays Jon

We smoked a few of the snapper & kahawai....I would never smoke gurnard

Have a great day Brent From Glenn & the Team

If you realy think that Julian...try doing the maths. The hook in it's mouth is a Black Magic KL5/0... these hooks are 40mm long

Biggest gurnard I've ever caught / seen Was a great weekend out at Grahams beach on the Awhitu Peninsula with very good friends . Came home with smoked fish and 10kg of fresh fillets

Have a great day Greg From Glenn & the Team

Have you checked to make sure the compressor turns first..it may be seized

WB Brian

Do you know the chassis number of the car you got the S50 from ?? do you have the EWS module and a key from that car that goes with the DME ?

Try our sponsor http://www.bimmersport.co.nz/forums/index....showtopic=10481

They race & modify M3's...talk to Rob over there... I did...he is so knowledgeable