Nobimmer

I bought the early access, and it felt terrible on the sim wheel. Waited for a few patches that were supposed to update it and they were no better. Fiddled around with the settings on the profiler and in game and it felt awful. It was either way too twitchy, way too much feedback or too much play in the wheel. To be fair I kind of gave up on it and haven't trialled any of the new updates yet. Anyone know if they're any better? Other than that (most important thing) it is pretty good. Not quite a sim like iRacing but pretty good for a rally game.

Can't wait for the name and address!

Haha who is this Murray55 expert?

Do the world a favour and run the c**t over and say it was self defence.

Gave the car a shakedown yesterday at Hampton downs. Spent the first half of the day chasing a bad misfire. After trying different coils, upping the fuel pressure, and adding a vacuum line to the regulator, I noticed that the water temp and oil pressure/temp values on the dash/logger were jumping up and down with values as low as 8 degrees and as high as 180psi. After fiddling around with the temp sensors etc, we managed to work out that the new link cam angle sensor is creating some EMI across the sensors, causing the ecu to think the Temps/pressures are too low or high and effectively changing the fuel/ign maps and kicking in safety rev limiters. Unplugged the Temp sensor and the base value was set to 100deg and it was sweet to go. Did 3 laps half arsed, and 2 laps at full noise and then something in the gearbox broke. Ha. Obviously got a bit more torque now. Was awesome to drive when it went though. Will have it resolved for round one. Yeow.

Haha yeah it's pretty subjective too. Suspension, driving style, track temp etc all make a difference obviously. I found 25 too low for big brakes and a little bit more power. 27 cold seemed to go ok and survive 8 laps without going off. Think they were coming in at 30 or so. Some guys swear they go out on 34 etc. I'm no expert at all But I seemed to have a good run at 27 cold on a hot track, hard suspension setup.

What are you going out / coming in at?

What tyres are you running

Have a set of 6 m54b30 pistons that have had the valve recess pocketed to allow high lift cams. Ring grooves have been cleaned and Pistons machine cleaned,ready to be installed. Have put them in block then decided to use a different piston for m52 stroker. Can throw in 4 m52b28 rods if needed for free (other 2 are mia) $350 or near offer, have no use for them.

Looks mint!

Good luck getting anything other than a m325i or 318is for that.

Never mind the fitment of the boot, I need to cut the bolts shorter on the wing. This is bolted into place but the boot isn't attached properly. Fit is tight on a standard e30 bonnet, but I'll glue it after I get it all back from the painters. Cheers again Hans.

Wahoo, see you soon mate. Edit, better start making some kids so I can get some more presents.

I used nail polish remover that my gf had to get a two years of racing rub damage off. Worked well, just buff it after.

Put the rks back on.

Stick it in raewyns car, and buy one of those supercharger covers that Hyde was making out of Perspex. No one will know.

Haha love that scum head light

The f**king Kardashians. f**k them all.

Just got to wait for trailing arm bushes and then the race car is ready for a shake down with its new motor. Got it back from dyno yesterday. Very happy with the results.

I think I have a spare clutch reservoir at home. I got the lines made at ADL for peanuts. Give them a try. Do these cars use coupe interiors or cabby?

contradiction.

Is that flap up all the way?

As a 78kg Arab from beachaven, the gang members are the least of my worries. They worry about them selves, are generally pretty tame unless you are from an opposing gang, and are pretty sweet to have a bit of a yarn with. I once had a tangi (I'm not sure what that is to be honest) next door and the hells Angels neighbours were some of the most genuine people I have ever spoken to. The real gangs aren't the problem, It is the wanky teens that dress in red and blue and mug old woman and spray paint fences that need to be culled. When was the last time you saw a patched member of a gang tagging on someone's fence? There are far more criminals that wear a blue shirt and tie every day.

Did you get the front crank bolt off?

I used a zf box and the standard e30 mount with some custom bushes. Pretty straight forward really.