pureboiracer

providing it didnt get too hot then that should be all. go to brake and trans man, their about $50

yellow means oil level and red means oil pressure. mabey the sensor is sticking and taking a while to read correctly.

if the seller is allowed to revoke the contract becuase of late payment then the money that has been paid should be refunded.

16" weaves. if only they fitted on my e30. might have to do that 5stud conversion

^yeah i must agree with the MSPEC line. i cannot resist smart comments when salesmen spin me that one.

have you checked for any blockages either in the resivior or the lines? providing it was rebuilt properly this would seem to me to be the only thing that could cause it.

technically speaking yes. as you have modified the braking system. although some has to realise that its not the origianal parts 1st. which i doubt very much would happen unless you stuck a big sticker on there saying "THIS IS MODIFIED PLEASE FAIL ME!!!"

it could be a few things. does the noise seem worse when applying throttle or when u let off the gas? does it seem to come from any one side of the vehicle? does it seem worse when taking 100k bends in the road either left or right? could possibly b wheels buckled, wheel bearings, cvs, diff, driveshaft or g.box. if i were you i would take it to a reputable mechanic and take him for a drive with you and point out the symptons to him because it appears as though the mechanics are having a hard time aligning their thought on which noises they hear and the specific noise you are talking about.

is it costly to get the 2.8 crank into the m20 block or is it a pretty simple job?

you should try bushmans draught.. cheap as chips crate beer and it tastes good. used to knock one of those out every week.

i have atleast 1. sometimes 2 or 3 v's a day.

or until you get half way round the track and notice your revs are going up but your speed isnt.

i can get the complete kit for 300ish.

just chop up some brake pads and glue bits of that to it bro. lol

e30 m20? fan turning on and off? have you replaced the viscous fan with an electric one? does your vehicle have aircon?

http://failads.com/50-really-ridiculous-car-mods/

^ lol now that e30 looks familiar......... i hope it was on a closed road........ where abouts in nz is that? it looks good.

if only he hit that merc.

ohhh tidy. thats a nice example.

yeah its not uncommon to get a small amount of contamination in the coolant/oil. i would do as above and just keep an eye on it, usually if a head gasket goes it goes good.

As in title, need some windscreen demister stips, the same kind of thing as on the rear screen but some that you can put on the front, Anyone know where and how much? Cheers Oli

Hey guys just wondering if an e30 rear screen will fit in the front? i doubt it but i thought i would ask to double check. cheers oli

he does commercial glass, ie windows, splashbacks, balluastrades etc, i dont know how well he can get hold of auto glass. probably better off with other suggestions.

take the grille out and adjust the bonnet catch, that should fix your problem.

i have found currency, parking tickets, chocolate bar wrappers, lollies, hair clips, sticky notes, even found plastic chopped up and siliconed over the heaterbox to stop air to the screen..... only on singapore import focuses for some reason.