polley

Too much plastic

About the same here then, just never bothered moving on from my learners.. You'll be fine on a litre bike, after the first few accidental wheelies through town and out of corners you'll quickly learn what you can and cant get away with.

Depends how long you've been riding i guess. Im still on my learners... and ride a litre bike ?

unless you're racing it or abusing the sh*t out of it, it will be fine.

I wouldnt be powder coating the inside.

Turn it around 180 degrees and modify the cams to drive from the other end i guess.

Pretty sure I've got a MAF around for one of these. Can have a looky if you want.

Part of that is coded in the EWS module, can be done though.

I can do EWS deletes for M52 if you need..

How are you getting a long with this? The m20 loom is really basic, and wont use the full potential of the link... ie batch injection etc, where the link can run sequential, and the rest of the wiring mods you'll need to do.. Just rip it all out and start from scratch

I run the bel sti magnum on the bike and its sweet. Only thing i have turned on is KA band. Never see laser around here, tho if i go auckland ways i turn it back on.

I had the same problem with ebc yellows, once they're hot and throw in some 200kph stops they were useless. Thats in what id suspect to be a lighter car too.

You could run wasted spark with just the trigger wheel off the crank and no dizzy or cylinder ID sensor. If you want to run sequential fuel or igniton then you'll need a cam position sensor. Idle control the M20 runs a 3 wire bosch idle valve, the link should be able to control. Crash / roll protection; not exactly the same but most ECU's and im sure the link will to, will switch the fuel pump off when the engine isnt running.. i.e crashed and turned ignition off or engine stalled. Not fool proof, but its there. aircon control it can take an input and will increase idle speed. The M20 generally has just a wot/idle switch, not a potentiometer style throttle posistion sensor which you'll want. The 6 wire TPS some e30's with the EGS auto trans had one thatll bolt straight up. or, make an adaptor plate and fit a E36 one.

The v12 is rubbish but i have spare parts for one and engine mounts to fit an e28 if your interested.

Yeah its hopeless, I was spinning through 3rd and that was feathering the throttle with r888's. Was really surprised at how low traction was compared to on the streets.

Firstly, 1psi difference is a nats fart in the scheme of things. Secondly a boost leak is not the only thing to cause low boost, you may be chasing shadows.

So how have be decided there is a boost leak? Is boost low or you have a fault code that indicates a boost leak?

pretty sure they do 3 hard Stops from 100kph and as long as there is no fade your good to go.

If you're getting up to 100c it will start to boil with no cap. Id just run it untill it starts to get warm / just before its starting to blow it out and shut it off. Put the cap on and let it cool right down and check the level, top it up if needed then take it for a run with a close eye on the temp . If it is pressurising it badly because of a hg fault itll likely blow it out the overflow so keep an eye on that.

If you google or facebook mse turbo i think you should find it. I have a hx35 with 12cm housing. Made 270kw on 12 psi. So if thats all the power you're after then maybe a smaller turbo would be better and youd get better response. But im sure steve would have more useful info on that

Im not an expert and will prob look stupid later but my thoughts... For that power level don't worry about the orings. If you still wanna use the hx40 at least try and get a smaller exhaust housing for it, maybe crunchy has some suitable ones. I bought mine off a nz crowd online but forget who it was now.

I ran the 318i badges on my m50 turbo e30 for ages ?

looks sweet. bet itll smoke those tyres good too.

Looking for a driveshaft, front half or complete to suit e30 with getrag 260. k thnx.

Looking for driveshaft, just front half or complete to fit E30 with getrag 260.