polley

Stick it in a jet boat

just drill some holes in your exhaust.

Sounds like he came to a stop pretty quick.

Just replace it, its like $50 and its good maintenance.

nope, especially not in cold weather. with full flow through the radiator the engine cant heat the water enough.

I think sinco customs has done a few in the past and they do nice work.

haha good one.

Its really not a problem, most people would of bought a new machine (or something else has failed )before the SSD fails because of too many writes.

last vid is set to private

Yeah its common for that to happen. That check ball wears out and allows forward and reverse clutch packs to be engaged at the same time when reverse is selected and quickly destroys the reverse clutches.

This thread is about replacing it with another auto box, it dosent need to be shorted out.

Yeah, they have different output flanges and also different tail housings depending on what they were used for. Bell housings also different depending on what it came off. All easy stuff to swap over though.

Pretty much, and most the time they have no idea what they are talking about.

$1500 isnt a bad price.

I intend on amputating my own arm so I can get this

Jesus... 48k.. I don't think I've ever had a set last over 10k.

If your looking at going cheap neither option is a good idea

group b is f**king sweet.

It dosent move enough air. By the time you spin it up fast enough to make any decent amount of boost it will be well out of its efficiently range and be pumping hot air. The larger SC14 unit would be better, but they still aint that great. Most people who do it end up pulling them off shortly after and going for something else.

Inhibitor is part of the gear selector, so wont be a problem.

You can leave the tps and wiring etc in place...

is there anything else out there available for coating exhaust manfiolds, turbos etc to keep heat in? I looked at the hpc coatings, and they are pretty expensive. I want to stay away from heat wrap though. How durable are the coatings, ie do they chip off easily or will they take a beating? pretty sure you could cook a steak on my bonnet at times.

Too small really.

Yes it will. Just need kick down cable and brackets

The EH model isnt that much flasher... If you're worried about it been "fun to drive" manual convert it.