Quick Questions

[B.M.W Ltd 950]

They don't work. Put your left hand on the ABS unit.... stick your right hand index finger up your arse and recheck. If that doesn't work first time put your right hand index finger down your throat.

[BMTHUG 1057]

They don't work. Put your left hand on the ABS unit.... stick your right hand index finger up your arse and recheck. If that doesn't work first time put your right hand index finger down your throat.

bahahahahahahahahahaha this is gold!

[westy 614]

No one's mentioned the dizzy cap yet?

[B.M.W Ltd 950]

That's a different diagnostic issue Tony... people need to take their hand off their cock before they use the banana skins

[polley 916]

They don't work. Put your left hand on the ABS unit.... stick your right hand index finger up your arse and recheck. If that doesn't work first time put your right hand index finger down your throat.

Find nearest river, stick head under 3 times. Remove twice.

[eliongater 718]

Sorry if this is the wrong topic.

What can people tell me about e30 b pillar rust? I'm looking at buying an e30 and it failed a WOF because of this rust. Any ideas if it would be fixable or terminal?

Thanks

[gjm 3258]

E30 PFL vs FL front lip

What's the difference? Given they are specifically referred to, I guess either there is no interchangeability, or perhaps one model didn't have a front lip at all?

[qube 3570]

e30 pfl

http://autosfans.com/wp-content/uploads/2010/09/1983-BMW-E30.jpg

e30 fl

http://e30.bmwdiy.info/lip-spoiler/lip-spoiler-06.jpg

comparison side by side pic

http://images.bimmers.no/files/dthojuqte1juriqy9jqh.jpg

Edited May 15, 2015 by QUBE

[gjm 3258]

e30 pfl

http://autosfans.com/wp-content/uploads/2010/09/1983-BMW-E30.jpg

e30 fl

http://e30.bmwdiy.info/lip-spoiler/lip-spoiler-06.jpg

comparison side by side pic

http://images.bimmers.no/files/dthojuqte1juriqy9jqh.jpg

Any idea if they can swap? I've never had to look.

[qube 3570]

dont think so but im sure anything can be made to fit. im pretty sure the lip i linked for the fl is called an "is" lip. e30 fans will clarify i guess

[VADER 3]

Fasteners & whatnot, i.e. inner guards etc, where's the best place to go for stuff like this please team (E60 5 Series)? I had a look at Repco, RAJ but it seemed a specialist place/eBay/overseas is a good option.

TIA

[BM WORLD 1283]

BM WORLD

in papakura

021433600

[email protected]

http://bimmersport.co.nz/topic/52801-e60-530i-2006-parts-car-just-in-bmworld/

[zero 1162]

Where is the engine code on the n42 engines?

I have found a whole heap of numbers cast onto the block, but none appear to be the engine code?

I've been on google for the last hour but no joy so far.......

[allan 295]

http://www.bimmerfest.com/forums/showthread.php?t=210016

http://www.bimmerfest.com/forums/showthread.php?t=416484

http://www.ehow.com/how_6820982_identify-bmw-engine.html

[B.M.W Ltd 950]

N42 is the engine code. You only need the last seven digits of the VIN number to order the correct parts for that engine in your car. You don't need the engine serial number.

[zero 1162]

Thanks, but I only have the engine and no info on the car it came from.

[B.M.W Ltd 950]

What other info or warranties did you get with this engine ? I hope it's done less than 30k

[zero 1162]

What other info or warranties did you get with this engine ? I hope it's done less than 30k

Its done 155kms, but I'm going to rebuild it anyway so I'm not overly worried about mileage.

Plus, it was only $150.

Then I will swap it over with the n46 motor in my car, and rebuild that engine and sell to recoup costs.

Or, I might just swap the heads over after I have reconditioned the one I've bought.

I'm trying to fix my valve stem seal problem in the most economic way possible (without cutting corners of course).

[Forrest 35]

Do adjustable rear camber arms (non-oem) to suit a E36 require a cert?

[huff3r 347]

Do adjustable rear camber arms (non-oem) to suit a E36 require a cert?

As far as I can see from here http://www.lvvta.org.nz/documents/suplementary_information/LVVTA_LVV_Cert_Threshold.pdf

They would require a cert. if it's not specifically allowed by the above publication then it automatically requires a cert.

[gjm 3258]

Do adjustable rear camber arms (non-oem) to suit a E36 require a cert?

As far as I can see from here http://www.lvvta.org.nz/documents/suplementary_information/LVVTA_LVV_Cert_Threshold.pdf

They would require a cert. if it's not specifically allowed by the above publication then it automatically requires a cert.

A rule of thumb seems to be that if you replace something non-adjustable with something adjustable, then you need a cert.

[huff3r 347]

It's an interesting list... apparently my (airbag) steering wheel swap requires a cert but I can install motorcycle handlebars from a "reputable brand" without a cert as long as it doesn't interfere with my (illegal) airbag.

Also - general question, since the WOF guys never lift my bonnet how could they tell if I have adjustable camber plates?

They should be lifting your bonnet, to check the firewall for rust, and to check the integrity of the suspension mounts. So a proper wof would spot them, someone cutting corners most likely wouldn't.

[Allanw 1071]

Interesting, my last WoF was sound but the one before that was with AA and I'm convinced they didn't lift the 'hood'. Maybe my recollection is poor.

Sounds like the AA - know about as much about cars as my Mum.

[benpaul12 62]

My front left wheel/area on turning a slower speeds is making an intermittent rubbing/rumbling noise. Nothing is hanging off(!), any ideas?

[zero 1162]

How do I disassemble the hydraulic lifters on the n42/n46 engine?

I'm rebuilding them as part of my engine build, but cant figure out how to open them.

I've seen diy's for the lifters in the 6 cylinder motors but not for mine.

Edited to add; should I keep the lifters in order for when they are reinstalled?

I have kept them in order anyway, but wondered if this is necessary?

Edited June 3, 2015 by zero