e30ftw
-
Content Count
2635 -
Joined
-
Last visited
-
Days Won
13
Everything posted by e30ftw
-
Already have, Pulled them apart and put them together with new lips. Must have been like 1 hour per wheel, hand tightening all 34, going over with a ratchet, then again with a torque wrench. Anyways enough thread jackin'
-
From memory Kerry's M52tub28 was like 240rwhp with S50 ITB's, Locked VANOS and a Link ECU I believe? Do a search on this forum you might find out for sure.
-
Already talked to SJ, Out of price range I'll lay it out here anyway, If anyone wants them $2900 takes em - Brand new lips, tyres. Just need them gone before I split them and sell in parts (Oh how I f*cking hate undoing 34 x 4 bolts)
-
Someone else would have tried to bid 2000. It's not tooooo bad, could be good for parts really at that price.
-
Ain't nobody got the $$$$$$
-
I may as well take the whole thing now
-
Talk to Geoff (FIAT 131R) - He has or had some new ones. I was putting mine in yesterday, I ended up getting the wrong size T piece which had slightly smaller fittings. Guess i'll have to rip one out the back of an e30 at some point and start again.
-
Bump
-
Just a female 3 way fitting, BNT has them. Then make or get a small 5cm line from MC to the T piece and fit your left and right brake lines to it.
-
I almost failed my last WOF after Tony's did a wheel alignment on my touring, some Muppet decided to rotate tyres left rear to right front and vise versa, meaning both corners bad directionals going the wrong way. Seriously, all you c*nts do is tyres, surely they would realise.
-
Bump
-
Probably close to $20. Pretty heavy.
-
Last bump... Auctions closing in 1 hour
-
No longer needed, i was only after the housing too, I didn't need the actual sensor. I ended up just buying a cheap Ebay knock off MAF for $30 delivered
-
I guess you could make it fit, It's been made to fit under an e30 using all the standard mounting points. Not sure what an e36 is like TBH, Could be close.
-
Bump. Have alot of it on Trademe @ $1 ending tomorrow night! M52 cams http://www.trademe.co.nz/Browse/Listing.aspx?id=932524570 Bosch 413 red label DME http://www.trademe.co.nz/Browse/Listing.aspx?id=932524589 Brake Master Cylinder http://www.trademe.co.nz/Browse/Listing.aspx?id=932524573 Bosch 405 DME http://www.trademe.co.nz/Browse/Listing.aspx?id=932524592 E30 Slave http://www.trademe.co.nz/Browse/Listing.aspx?id=932535623 E46 M3 dual mass flywheel http://www.trademe.co.nz/Browse/Listing.aspx?id=932685551
-
I am selling my e30's exhaust I had made a few months back when I had an M52 in my E30. Full 2.5" from Gearbox back - 2 Coby mufflers and a Magnaflow rear muffler. Nice and deep, not too loud but not quiet either. Probably prefer pickup unless you can arrange shipping. $450 ono.
-
Andy lied, Bump
-
Ah, can't tell you Dont have a way to measure. It was from a 320i touring. And yes should fit, they still have the mounting parts on chassis. It's only got one metal mount, you'd need another - also sway links binned.
-
No it's the same throughout, cant change it without messing with the entire column. Probably the wrong adapter, not e30.
-
I believe the MAF is removable from the housing (correct me if I am wrong), Anyone have a stuffed MAF, or one without a sensor? Just after the housing only - Must be the 3.5" diameter. Picture from internet
-
Shotgun the S54 when your parting out
-
It basically can be bolt out bolt in, you just need to get the right parts. it honestly blows my mind how much parts are interchangeable between various models and back into an e30, the right parts from the right models and everything is basically made to fit.
-
Oh dang where were you when I needed you 325i rear end! Everytime!!!
